









A: Blue60™ has been fire tested to 30 & 60 minutes (BS476 Pt20/22: 1987 & BS EN1634-1) in timber doorsets
A: Our foam is coloured blue to make it easily identifiable and to differentiate from other fire foams on the market.
A: The minimum practical / tested width is 3mm and maximum tested gap is 39mm.
A: Blue60™ has been tested as a system with Blue60 fire rated packer and with timber packers and standard screw fixings.
A: There is no need to cap with mastic for fire ratings of up to 60 minutes.
A: Architraves are optional,Blue60™ Foam has been tested with and without.
A: Unlike other Fire Foams Blue60™ has a 24-month shelf life whilst stored in temperate conditions (5°C > 30°C). Blue60™ has also been tested when applied 24 months after manufacture with the same perfect results
A: All relevant information can be downloaded on our website: www.blue-60.co.uk
A: A 750ml can will seal 3-4 standard single doors with a max 10mm x 70mm gap or 2-3 with a 10mm x 100mm gap
A: Yes, Blue60™ sound reduction capabilities of up to 45 dB Rw.
A: Blue60™ has smoke leakage evidence to BS EN 1634-3: 2004.
A: It saves time and money against traditional methods like mineral wool & mastic and most importantly is the most widely tested system on the market for fire stopping around a fire door frame
A: Yes
A: Blue60™ has been tested with Orange240™ mastic being used to over gap the Blue60™, cutting back the Blue60™ 10mm deep and filling the gap with Orange240™
A: Use Blue60™ in the normal way, down to the point where the gap goes below 3mm and it become impossible to get a foam nozzle into the gap and guarantee the gap is fully filled, then fully fill the remaining gap with Orange240™. This method has been fully tested